Masters, yesterday I tried to do a P2V of a Windows 2003 Server with 8GB of RAMand about 300GB of hard drive, server, Dell PE 2800 with gig NICs, in the process Iwas using my laptop that has vCenter Converter, but the network card isFastEthernet, the target server is a Dell T410 with 8GB of RAM with ESXi 5, butalready have a Windows server 2008 R2 and a Debian virtualized ESXi free memory is only 1.5GB of RAM.
Well I started the process and was taking forever, I've surprised because this process servers in other similar profile, changing only the manufacturer of IBM andDell to this day the P2V took half an hour yesterday every time I started it stipulated1h 3 minutes, then jumped to 24 hours, transfer rate miserable 985kb /s.
Well, the switch is a customer Furukawa FastEthernet, so I thought, it should be, so I made a cross cable, called ESXi in Giga Ethernet and Giga Ethernet in 2003,installed in VMware Converter to convert servidro own, well, with cross cable, Giganetwork, should go fast, I thought.
Nah, just as slowly, the same throughput.
Well, with my testimony, what can you guys think is catching? Could it be memory?But I do not think the end is converted and the machine is switched off at the destination until it is finished, the memory would be an adjustment factor to be done after converted, ok?
I found it very strange the delay for the conversion, dem me the power of knowledgeto you.
↧
P2V infinitely slow
↧