Hello!
I have an 3 esxi server
I have dswitch configured
all servers are included in dswitch
But when I try to migrate the virtual machine, I get this error: "Currently connected network interface" 'Network adapter 1' uses network 'Corp (DSwitch)', which is not accessible.
Hi,
I have VM workstation 15 Pro. I have a simple question why I can't create or add network card from "Virtual Network Editor" see attachment.?
Thank you
Check out so many on demand webinars on new technologies and all kinds of innovative topics.
Hi! I have a Samsung tablet with s-pen. The device is work managed and I have setup a profile with a custom launcher.
Problem is that s-pen won't work: if I touch the screen a pop-up ballon tells "unable to use air command. keep pressed...to unlock the app".
BUT if I enter admin mode in the launcher it DOES work.
Any clue on how to make it work for the normal user?
Thank you.
Hello guys,
i need help to extract from my VCenter, with powercli script , all information like this :
Name | State | Uptime | NIC | PortGroup |
| IP | Host | Provisioned Space | Used Space | CPU | RAM |
Reservation - RAM/CPU | VMDK / Datastore | Host CPU - MHz | Host Mem - MB | Notes | Fault Tolerance | Snapshot | VMWare Tools | NB_LAST_BACKUP | Tags |
and send email on cvs and html format.
Please help me.
Thx
Davide
Hi,
I wanted to post my findings here after recently deploying a PoC and reading this community post - App Volumes 4.0 performance
Deployed environment:
Horizon 7.11
AppVol 4 (latest)
DEM 9.10
FSLogix 2.8 (latest) - Profile and Office 365 container.
Windows 10 1909
First off to use App Volumes and FSlogix you have to add the exclusions into the snapvol.cfg file mentioned in this post -https://www.vcloudinfo.com/2019/08/vmware-app-volumes-and-fslogix-container-conflicts-resolved.html
Using App Volumes 4.0 with or without FSLogix resulted in poor VM performance and poor login times. I used full DEM personalization and dropped the FSLogix containers entirely to test there wasnt any conflicts and VM responsiveness was still poor. I was seeing behavior such as the svservice taking an age to process and then windows explorer constantly refreshing and flashing when it finally logged in. Also just browsing around the C:\ or launching apps (even base image apps) was really slow.
Login times were 1m30+ with App Volumes 4 so for good measure i upped my vCPUs to 4 per instant clone and this made no difference. FSLogix on its own with no App Volumes and a few apps installed within the base image was much faster about 40/50 seconds login and rapid responsiveness. I decided to create a new base image from scratch, again as always using the techzone optimization guide to rule out any base image issues and i also deployed App Volumes 2.18. Im now happy with the login times / VM performance & responsiveness using FSLogix containers and App Volumes 2.18. I had high hopes for 4.0 with the new features and "improved" performance but was bitterly disappointing with the outcome from my testing. Has anybody else played around with 4.0 yet?
My host system is windows 10. and I have a guest OS windows 7 running in VMware 15 pro
I would like to create few network card in windows 7 and I following the direction using "virtual network editor". e.g NIC 192.168.100.0/24
The problem I experienced was the GNS3 can't see the new windows 7 network card why?
Thanks for your inputs.
New to VIO 6 and looking for either a step by step guide or a HOL. Anything anyone could recommend? The installation and Admin guides dont go into details of how to obtain VM images, or how to properly configure External and Internal Networks and SR-IOV.
I am for example getting errors when creating networks on the GUI but the configuration fail without any explanation. Would be great to see where logs are being generated.
Hallo Zusammen,
wir haben ein Problem auf einem VMware ESXi, 6.5.0, 13635690. Es scheint, dass wenn zu viele VM's auf diesem Host laufen, einige die Netzwerkverbindung verlieren. Gibt es da eine Einstellung, die man vornehmen kann?
Gruß
RS
I need to run some scripts to collect data from a large suite of VMs and I managed to use PowerCLI (via Powershell) and everything connected and worked fine. When I came back later to roll all the commands into a script so other people could run it I now get this error:
Connect-VIServer : 23/03/2020 14:29:22 Connect-VIServer An error occurred while making the HTTP request to https://<vcenter server>/sdk. This could be due to the fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caused by a mismatch of the security binding between the client and the server.
This happens whether I run the command in PowerShell or ISE and I just can't work out why - can anyone help?
Hallo zusammen,
als Versuchs- und Testsystem für VMware 6.7 habe ich mir einen Aufbau mit vier ESXen, iSCSI-Storage und dem notwendigen Netzwerk zusammengestellt. Als ESXi-Server verwende ich vier Lenovo M93q tiny Mini-PCs. Da diese jeweils nur eine onboard-NIC enthalten, habe ich für die vier notwendigen weiteren Netzwerkverbindungen pro Host vier USB-Ethernet-Adapter verwendet. Die Treiber hierfür finden sich hier:
USB Network Native Driver for ESXi | VMware Flings
Nach Anweisung installiert funktioniert alles einwandfrei.
Die böse Überraschung kam dann nach dem ersten notwendigen Reboot der Hosts: Nach dem Reboot verlieren die Hosts alle Netzwerkverbindungen, die mit Hilfe der USB-Ethernet-NICs hergestellt sind. Die Bindung der NICs zu den virtuellen Switches geht beim Reboot verloren. Das Problem liegt offensichtlich an der Reihenfolge, in der ESXi beim Reboot die Treiber und Geräte einbindet.
Erst wenn mittels des vCenters manuell alle NICs wieder korrekt an die virtuellen Switches angebunden sind, funktioniert das Netzwerk wieder korrekt. Dazu muss aber das vCenter sauber laufen, weil die gleiche Aktion im WebClient der ESXi mit einer Fehlermeldung "falscher Parameter" fehlschlägt. Man kann sich vorstellen, wie mühsam ein Reboot des ganzen Systems unter diesen Umständen wird.
Kennt jemand eine Lösung des beschriebenen Problems, so dass ein Reboot der Hosts fehlerfrei und ohne Eingriff von außen abläuft? Anmerkung hierzu: Das im Fling zur Wiederherstellung der Bindung der NICs zu den virtuellen Switches vorgeschlagene Script funktioniert in diesem Fall nicht, das wurde bereits ausprobiert!
Viele Grüße
Uli Porath
Tanzu is a cloud offering from VMware Which has various services as offerings on App Modernization:
Ubiquitous Kubernetes runtime embedded in vSphere and operable across on-premises, public cloud and edge environments with total consistency.
Single point of control to provision or attach and manage comprehensive policies for all of your Kubernetes clusters.
Unified platform for all your containers and virtual machines, offering familiar tools for operators and self-service access to resources for developers.
Application runtime optimized for Spring and Spring Boot and providing native Windows and .NET support, with turnkey microservices, operations and security.
Curated and customized implementation of the Bitnami Community Catalog to speed development with base images that are maintained, tested and secured
Enterprise observability for your entire stack – from infrastructure to application – to drive insights, decisions and actions across your organization.
Hello,
When applying a certificate using our Microsoft CA (I followed the VMware article/video on how to create a certiifcate template) to our vCenter (Windows) server, it fails and rolls back. The issue I'm getting is the same as the following discussion posted a few months back. However, there's no fix provided:certificate-manager 'lstool reregister' failed: 1 / VCSA Certificate Manager Option 1: Replace Machine SSL certificate with Custom Certificate
The error in the log:
2017-10-19T00:26:19.474Z ERROR certificate-manager Error while replacing Machine SSL Cert, please see C:\ProgramData\VMware\vCenterServer\logs\vmca\certificate-manager.log for more information.
2017-10-19T00:26:19.474Z ERROR certificate-manager 'lstool reregister' failed: 1
2017-10-19T00:26:19.476Z INFO certificate-manager Performing rollback of Machine SSL Cert...
Is there an actual fix to this that can be made available instead of me having to call VMware support?
Thanks!
My windows 10 VM start booting today.
"The firmware encountered an unexpected exception. The virtual machine cannot boot."
My other 2 vms are still booting correctly.
I tried to revert this vm to my last snapshot. After it started up, within a minute it through the windows encountered an expection blue screen. When it tried to restart it gave the same firmware error again.
My VM that is no longer working is UEFI.
My vms that are still working are BIOS.
I updated workstation pro to 15.5.2, but no luck
Any ideas?
Hello,
can anyone check what i am doing wrong ? I want to test if my newly installed vro can receive snmp traps. Steps i have taken:
1. Install vro 8.0.1
2. Auth via vc sso
3.Added a device (192.168.1.97) - my laptop
4.Ran workflow - Wait for a trap on all devices , wait for a trap on a snmp device(pointing to my laptop , port 4000).
When reunning wait for a trap o nall devices i am assuming that is awaiting for a trap on port 4000 as this is the default, when running via a snamp device i have sent snmp device port 4000, public.
i run from my laptop:
C:\SnmpTrapGen>SnmpTrapGen.exe -r:192.168.1.150 -t:10 -c:"public" -to:.1.3.6.1.2.1.1.4.0 -p:4000 -v:2c
SnmpTrapGen v1.1 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on http://www.snmpsoft.com ]
OK
The workflow is still waiting.
I have also ran a python script directly from the vRO 8.0.1 appliance itself
root@vro [ ~ ]# cat sendsnmptolocalvro4000.py
from pysnmp.hlapi import *
from pysnmp import debug
debug.setLogger(debug.Debug('msgproc'))
next(sendNotification(SnmpEngine(),
CommunityData('public'),
UdpTransportTarget(('192.168.1.150', 4000)),
ContextData(),
'trap',
# sequence of custom OID-value pairs
[ObjectType(ObjectIdentity('1.3.6.1.2.1.1.1.0'), OctetString('my string')),
ObjectType(ObjectIdentity('1.3.6.1.2.1.1.3.0'), Integer32(42))]))
Also nothing happens. The workflow is not being interrupted in anyway, indicating that he has received the trap.
I have set up a trap receiver on other node in the network and those 2 script are sending it ok. from vRO appliance the python script can trigger the trap on my windows machine running snmpb.
Any idea if i have missed anything ? I checked 2 books, few tutorials and i think i am doing exactly what others but its just not working. Firewall is not the case since the python is even running locally from the vRO + its flat home network , no fw/gw.
I can send snmp trap from vRO to my laptop snmpb
I have also configured vcenter vc01.greg.labs to send snmp traps to the VRO + my laptop with snmpb
VC alarm is triggered when VM is created. IT sents 1 trap to my laptop +1 trap to vRO. And VRO is not handling it .
vRO trap host configured with port 4000 and is listening
| port | 4000 |
|---|---|
| display name | Trap Host (online) |
| @fullType | SNMP:TrapHost |
Edit: I have also deployed vRO 7.6, same config, everything 1:1 as in 8.0.1 case , and here it worked all as expected, waiting for traps on 4000 port, and i have generated one from my laptop using snmptrapgen and workflow has triggered (listen for snmp trap on all devices). So is there something i should know about 8.0.1 ? Some extra steps in order to configure it ? Are we supposed to use 8.0.1 ?
Can Vmware Workspace ONE UEM set app-level policies for any app in the Apple App Store?
Hello,
We replicate VMs from our vCenter to Azure and we can successfully failover to azure and start using the VMs the with no issues. However if we fail back we get this error:
Action failed on vCenter/ESXi server with reason: 'A general system error occurred: Error creating disk Error creating VVol Object. This may be due to insufficient available space on the datastore or the datastore's inability to support the selected provisioning type'.
This VM I'm testing sits in a normal Datastore and not a vVol. I've logged with Microsoft Azure and they have no idea. The account I'm using has full admin access too.
Any ideas?
It seems this client version has not updates as of yet to 5.4.1, is there a timeline for this?
Link: VMware Horizon Client for Chrome - Chrome Web Store
The local plugin's plugin.xml allowed the addition of separators in context menus with:
<com.vmware.actionsfw.ActionMenuItemSpec>
<type>separator</type>
</com.vmware.actionsfw.ActionMenuItemSpec>
Does the remote plugin's plugin.json have an equivalent?
buonasera a tutti,
come posso visualizzare la dashboard del mio host da remoto???
grazie a tutti del vostro aiuto